JVC AX-THL1 Home Theater System User Manual


 
8
Connections
To obtain the best possible sound from this system, you need to place all the speakers except the subwoofer at the same
distance from the listening position.
If your speakers cannot be placed at the same distance from the listening position
You can adjust the delay time of the speakers. See “Delay menu (DELAY)” on page 30.
NOTE
Place the satellite speakers on a flat and level surface.
The subwoofer, front and center speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed
properly, they may cause color distortions. So, pay attention to the following when installing the speakers.
When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers. Then
wait at least 30 minutes before turning on the TV’s main power switch again.
Some TVs may still be affected even though you have followed the above. If this happens, move the speakers away from the TV.
The surround speakers are not magnetically shielded.
If they are located nearby the TV or monitor, it will probably cause color distortion on the screen. To avoid this, do not place the
speakers nearby the TV or monitor.
Speaker layout
Front right
speaker
Center speaker
Subwoofer
Surround left
speaker
Surround right
speaker
Front left
speaker
Do not connect the power cord until all other connections have been made.
TH-L1[JC].book Page 8 Friday, March 16, 2007 10:22 AM