Filter
Top Products
17
USING TUNER PRESETS
Open/
Close
Power
DVD VCD CD MP3
Headphone
Select
Source
Volume
Volume
STANDBY
REPEAT
A - B
SUBTITLE
TITLESETUP
DVD
1
GOTO
2
RETURN
AUDIO
DISPLAY
ANGLE54
3
6
7
8
ZOOM
ENTER
TEST
TONE
MUTESLEEP
SELECT
SLOW
STEP
LISTENING
ADJ/VOL
ST/MO
MEMO
STA -
TUN - TUN +
STA +
+
_
LANGUAGE
N / P
>10 0
9
PROGRAM
MENU
/ PBC
STOP PLAY / PAUSE
TUNER AUX
OPEN /
CLOSE
SOURCE
TUNER
STANDBY
NUMBER BUTTONS
STATION +/-
TUNING +/-
MEMORY
TUNER
Presetting Radio Stations
You can preset up to 40 of your favorite AM and FM stations, in any
combination, in the tuner memory for easy recall.
1. Press STANDBY on the remote
control to turn the system On.
2. Press either TUNER on the remote
control or SOURCE on the front
panel, repeatedly to select the
Tuner and the desired radio band,
AM or FM.
3. Tune to the first station you wish to
preset.
• Manual Tuning - repeatedly press
W
/
X
TUNING +/- on the front
panel or the remote control until the
desired frequency appears on the
display. (Note: You must use manual
tuning if your are trying to tune to a
weak station.)
• Automatic Tuning - press and hold
W
/
X
TUNING +/- on the front
panel or the remote control until the
display begins to scan up or down,
then release the button. The tuner
will stop at the first strong station it
finds. Repeat this process until it
stops at your desired station.
on the right) to select another pre-
set memory number, and press
MEMO again to enter that station in
the selected preset memory
number.
Note:
You must press MEMO to memorize a
station while the Memory indicator
appears in the display (approximately
4 seconds), otherwise the station will
not be memorized.
7. Repeat steps 2 to 6 to enter up to
40 stations in the tuner memory.
Recalling Preset Stations
1. Press STANDBY on the remote
control to turn the system 'ON' and,
if necessary, press TUNER to select
the Tuner function.
2. Press either STA + or STA - on the
remote to select the desired preset
memory number.
Note: You may also use the number
keys on the remote control to go
directly to one of the preset memory
stations. To select preset stations 1
through 9, press the number key. To
select preset station numbers higher
than 9 press the ">10" key one or more
times followed by the appropriate
number key, for example:
To Select Station Press These
Number: Keys:
10 >10 and 0
15 >10 and 5
21 >10 twice and
then 1
34 >10 three times
and then 4
40 >10 four times
and then 0
Changing Preset Stations
To change any of the preset stations
simply tune to the new station you
wish to memorize and enter it in the
preset memory number you wish to
change. The new station will be
memorized and the previous station
will be erased.
4. When the desired station appears in
the display (Example: FM 103.5 MHz)
press MEMO on the remote control.
The Memory indicator and “P01”
appear in the display indicating that
you are ready to enter that station in
preset memory #1.
5. Press MEMO on the remote control
again to enter the station into
memory. The Memory indicator and
the preset station number disappear
and the station is memorized.
6. To enter the next station in memory
follow steps 2 and 3 to tune the
desired station and press MEMO on
the remote control. Then press
either STA + or STA - on the remote
control or the desired NUMBER
button (how to select see the note