IRiver iMP-900 CD Player User Manual


 
Using the Password
Setting the Password
53
Using the Password
Changing the Password
54
or
Push
or
If you select “ON”on the MENU
GENERAL Password, the right screen
is displayed after loading screen when
youturntheplayeron.
Select the menu you want on the “MENU
GENERAL Password”.
(Refer to page 40)
Press
, (or Volume +, Volume -) to move the numeral and press the
or NAVI/MENU button to select it. The screen as below is displayed.
- The Password must input as 4 digits.
- The Password is initialized as “0000”when the firmware is upgraded.
CAUTION!
Click
Select “CHANGE”on the “MENU
GENERAL Password”.
Input the old password. (The
initial password is “0000”)
Input the new password of 4 digits.
Input the new password of 4 digits
to confirm once more.
If the password to change and the password to confirm are the same, the
password is automatically changed to the new one and the playback screen is
displayed on the LCD.
If you select “ON” on the password menu, you must input the new password to
turn on the player.
If the password to confirm is different from the changed password, the password
screen goes back to the Confirm screen.
Press the STOP button to exit changing the password, and the old password is
preserved.
The Password is initialized as “0000”when the firmware is upgraded.
3
3
2
2
1
1
When the input password is correct, the above screen disappears and changes
to Total screen. Press the PLAY button to start the playback.
If the password is wrong, the screen goes back to the input screen.
3
3
4
4
2
2
1
1
Specific features
Specific features
NOTE