Filter
Top Products
17
1 4
G
23 5678
9F
IJHKLM
Rear Panel
1 RI REMOTE CONTROL jack: An Onkyo product with RI
jack can be connected and synchronized with this unit.
2 FM ANTENNA jack (75 Ω) and AM ANTENNA
terminal: The supplied antennas are connected.
3 COMPONENT VIDEO IN/OUT jacks: Component video
input/output jacks
4 ETHERNET port: Used for LAN connection
5 RS232 port: Connected to the home control system. ()
6 IR IN A/B/OUT jack: Connected to the multiroom
remote control kit. ()
7 12V TRIGGER OUT A/B/C jacks: Allows you to connect
a device with trigger input jack in a separate room to
enable power link operation between the device and the
unit. ()
Special devices or cable connections are necessary to use the
control functions 5 to 7. Contact the specialized stores for more
information.
8 HDMI IN/OUT jacks: Digital video signals and audio
signals are transmitted between the unit and the
connected devices.
9 Wireless antenna: Used for Wi-Fi connection or when
using a Bluetooth-enabled device. Adjust their angles
according to the connection status.
90°
180°
90°
180°
F AC INLET: The power cord is connected.
G DIGITAL IN COAXIAL/OPTICAL jacks: Digital audio
signals are input.
H GND terminal: The ground wire of the turntable is
connected.
I Composite video and analog audio jacks: Analog
video signals and audio signals are input.
J MONITOR OUT V jack: Video signals are output to the
connected monitor or TV.
K PRE OUT jacks: A power amplifier or subwoofer with
built-in amplifier is connected.
L PRE/LINE OUT ZONE2 jack: Audio output jacks
connected to the integrated amplifier for multi-zone
playback in a separate room.
M SPEAKERS terminals: Speakers are connected. To
use the Multi-zone function, connect the speakers in the
separate room to the ZONE2 speaker terminals.