Filter
Top Products
33
Insignia NS-HT511 Home Theater System
www.insigniaproducts.com
Specifications
Amplifier section
Video section
Tuner section
General section
Subwoofer
How do I change
the language of a
multiplex source
•Use the Multiplex setting on the Audio Adjust menu to
select Main or Sub.
The following
settings can be
made for the
composite video
inputs
You must use the buttons on the unit to make these settings.
1. While holding down the input selector button for the input
source that you want to set, press SETUP.
2. Use / to change the setting.
3. Press the input selector button for the input source that you
want to set when you have finished.
Video Attenuation
This setting can be made for the BD/DVD, VCR/DVR, CBL/SAT,
GAME, or AUX input.
If you have a game console connected to the composite video
input, and the picture is not very clear, you can attenuate the
gain.
• Video ATT–0: (default).
• Video ATT–2: Gain is reduced by 2 dB.
Note
Design and specifications are subject to change
without notice.
Element Specification
Rated output power
All channels
90 watts minimum continuous power per channel, 8 ohm
loads, 1 channel driven at 1 kHz with a maximum total
harmonic distortion of 1%.
THD (Total Harmonic
Distortion)
0.08% (1 kHz, 1 W)
Input sensitivity and
impedance
200 mV/47 kohms (LINE)
Output level and
impedance
200 mV/2.2 kohms (REC OUT)
Frequency response
20 Hz - 50 kHz/+1 dB - 3 dB (DSP bypass)
Tone control
±10 dB, 50 Hz (BASS)
±10 dB, 20 kHz (TREBLE)
Signal to Noise ratio
90 dB (LINE, IHF-A)
Speaker impedance
6 ohms - 16 ohms
Element Specification
Input sensitivity/
Output level and
impedance
1 Vp-p/75 ohms (Component)
0.7 Vp-p/75 ohms (Component PB/CB, PR/CR)
1 Vp-p/75 ohms (Composite)
Component video
frequency response
5 Hz - 100 MHz/±0 dB, - 3 dB
Category Problem/Possible Solution
Element Specification
FM tuning frequency
range
87.5 MHz - 107.9 MHz
AM tuning frequency
range
530 kHz - 1710 kHz
Preset channels
40
Element Specification
Power supply
AC 120 V, 60 Hz
Power consumption
3.3 A
Standby power
consumption
0.2 W
Dimensions
(W x H x D)
17-1/8" x 5-15/16" x 12-7/8"
435 mm x 150.5 mm x 327 mm
Weight
17 lbs (7.7 kg)
HDMI
Input
IN1, IN2, IN3, IN4
Output
OUT
Video Resolution
1080p
Audio Format
Dolby TrueHD, DTS Master Audio, DVD-Audio, DSD
Supported
CEC, 3D, ARC, Deep Color, x.v.Color, LipSync
VIDEO INPUTS
Component
IN 1, IN 2
Composite
BD/DVD, VCR/DVR, CBL/SAT, GAME, AUX
VIDEO OUTPUTS
Component
OUT
Composite
MONITOR OUT, VCR/DVR
AUDIO INPUTS
Digital
Optical: 2 Coaxial: 1
Analog
BD/DVD, VCR/DVR, CBL/SAT, GAME, TV/CD, AUX
AUDIO OUTPUTS
Analog
VCR/DVR,
Subwoofer Pre Output
1
Speaker Outputs
Front (L, R), C, SL, SR
Phones
1 (6.3 ø)
Element Specification
Type
Bass-reflex
Input sensitivity/
Impedance
140 mV/20 kohm
NS-HT511_11-0310_MAN_.book Page 33 Wednesday, April 13, 2011 11:12 PM