27
Insignia NS-HT511 Home Theater System
www.insigniaproducts.com
Controlling other
components
You can use your receiver’s remote control to
control your other AV components. This section
explains how to enter the remote control code for a
component that you want to control, such as a DVD
player, a TV, or a CD player. See “Remote control
codes” on page 28.
Preprogrammed remote control codes
Remote control codes for Insignia Blu-ray disc
players and Insignia TVs are preprogrammed into
the remote control. You do not need to enter a
remote control code to control these components.
To enter remote control codes:
1 While holding down the REMOTE MODE button
to which you want to enter a code, press and
hold down the DISPLAY button until the
Remote indicator lights up (about three
seconds).
2 Within 30 seconds, press the number buttons to
enter the 5-digit remote control code. The
Remote indicator flashes twice.
To reset a REMOTE MODE button:
1 While holding down the REMOTE MODE button
that you want to reset, press and hold HOME
until the Remote indicator lights (about three
seconds).
2 Within 30 seconds, press the REMOTE MODE
button again.
The Remote indicator flashes twice, indicating
that the button has been reset.
Each REMOTE MODE button is preprogrammed
with a remote control code. When a button is
reset, its preprogrammed code is restored.
To reset the remote control:
1 While holding down the RECEIVER button,
press and hold HOME until the Remote
indicator lights (about three seconds).
2 Within 30 seconds, press the RECEIVER button
again.
3 The Remote indicator blinks twice, indicating
that the remote control has been reset.
To control other components:
• Press the REMOTE MODE button that you have
programmed with the remote control code for
your component.
Using the remote control to control other
components
Press the REMOTE MODE button for the
component you want to control first.
#
Button/
Component
TV
DVD
player/
recorder
Blu-ray
disc player
VCR/
PVR
Satellite/
Cable
receiver
1
|/ ON/STANDBY
XX X X
2 Input selector X
3 These buttons can control the TV, regardless of the mode selected.
4 TOP MENU X
5 ENTER
//
/
XX X X
6 SETUP
7
/// /
//
XX X X
8 SEARCH X* X X* X*
REPEAT X* X X* X*
RANDOM X* X X* X*
MODE X* X X* X*
9 Numbers X X X X
10 DISPLAY XX X X
11 MUTING X X X X
12 MENU X
13 RETURN X X X X
14 HOME XX X
15 CLR X X X X
Note
Certain buttons may not work as expected with some
components, and some may not work at all.
NS-HT511_11-0310_MAN_.book Page 27 Wednesday, April 13, 2011 11:12 PM