Filter
Top Products
12
Insignia NS-HT511 Home Theater System
www.insigniaproducts.com
To mount the center speaker horizontally, use the
two keyhole slots shown to hang each speaker on
two screws that are securely screwed into the wall.
AV Recording
Audio sources can be recorded to a recorder (such
as a cassette deck, CD-R, MD [MiniDisc]) connected
to the VCR OUT jacks. Video sources can be
recorded to a video recorder (such as a VCR or DVD
recorder) connected to the VCR/DVR Out jack.
To record an audio source:
1 Use the input selector buttons to select the
source that you want to record. You can watch
the source while recording. The receiver’s
MASTER VOLUME control has no effect on
recording.
2 Start recording on your recorder.
3 On the source component, start playback. If you
select another input source during recording,
that input source is recorded.
Recording Separate AV Sources
You can record audio and video from completely
separate sources, allowing you to overdub audio
onto your video recordings. This function takes
advantage of the fact that when an audio-only
input source (TV/CD) is selected, the video input
source remains unchanged.
In the following example, audio from the CD player
connected to the TV/CD IN jack and video from the
camcorder connected to the AUX INPUT VIDEO
jack are recorded by the VCR connected to the
VCR/DVR OUT jacks.
To record separate AV sources:
1 Prepare the camcorder and CD player for
playback and the VCR for recording.
2 Press the AUX input selector.
3 Press the TV/CD input selector. This selects the
CD player as the audio source, but leaves the
camcorder as the video source.
4 Start recording on the VCR and start playback
on the camcorder and CD player. The video from
the camcorder and the audio from the CD player
are recorded by the VCR.
Rocketboost Setup
Rocketboost™ is expandable wireless digital audio.
• Products with Rocketboost™ technology let you
easily expand your listening experience
throughout your home.
• Rocketboost™ does not interfere with other
wireless products in your home.
• Rocketboost™ is uncompressed digital audio
compatible with all audio formats like Dolby
TrueHD and DTS-HD Master Audio used with
Blu-ray.
When you see the Rocketboost logo on any
product, it has been designed to work with other
Rocketboost products, no matter who
manufactures them.
Cautions
• A mounting screw’s ability to support a speaker
depends on how well it’s anchored to the wall. If
you have hollow walls, screw each mounting
screw into a stud. If there are no studs, or the
walls are solid, use suitable wall anchors.
• Use screws with a head diameter of 5/16"
(9 mm) or less and a shank diameter of 1/8"
(4 mm) or less. With hollow walls, use a
cable/pipe detector to check for any power
cables or water pipes before making any holes.
• Leave a gap of between 3/16" (5 mm) and 7/16"
(10 mm) between the wall and the base of the
screw head. (We recommend that you consult a
home installation professional.)
VIDEO
IN
AUDIO
IN
LR
VCR, DVD recorder,
cassette tape deck,
VCR, DVD recorder, cassette tape deck,
CDR, MD recorder, and similar.
CD player
VCR
To record the audio from one source input and the
video from another source input
: Video signal
: Audio signal
Camcorder
NS-HT511_11-0310_MAN_.book Page 12 Wednesday, April 13, 2011 11:12 PM