Filter
Top Products
Chapter 2 • Antenna parts and required tools
1037312-0001 Revision A
19
Additional parts for
J-type radio
The parts listed in Table 3 are included only in the antenna kit for
the J-type radio. The antenna kit for the J-type radio also includes
the part listed in
Table 2.
Table 3: Additional small hardware parts included in the antenna kit for the J-type radio assembly
Part Quantity Comments
1-inch inside diameter O-ring 1 These parts are used to attach the:
• Waveguide transition to the radio assembly
• Upper mounting bracket to the transmitter
• Upper and lower mounting brackets to each other
The hardware for each task is specified in Chapter 4
– Installing a J-type radio assembly.
M4 x 12-mm socket-head cap screws 4
M4 lock washers 4
5/16-18 × 1-inch hex bolts 2
¼-20 × 1-inch hex bolts 2
¼-20 × 0.75-inch carriage bolts 4
¼-inch flat washers 4
¼-inch lock washers 6
¼-inch hex nuts 4
Feed horn clamp 1