Filter
Top Products
Chapter 3 • Installing the radio and antenna assemblies
16
1035567-0001 Revision A
Adjusting elevation
This section describes how to adjust the antenna elevation to the
value determined by the installation software. Later, when you
point the antenna, you fine-tune the elevation adjustment.
Figure 13 illustrates how you adjust the elevation by moving the
antenna up and down.
To adjust the elevation:
1. Make sure you know the elevation value calculated by the
installation software.
2. Orient the Az/El cap so the TOP label is at the upper right.
Figure 13: Adjusting elevation
T0145007
Elevation
Elevation