Filter
Top Products
34-ST-03-64
Page 23
STR14A
STR12D & 13D 14G & 17G
TABLE II - SEALS (continued)
Diaphragm Lower
_ _ _ _ _ _ BA _ _ _ _ ●●●
_ _ _ _ _ _ BB _ _ _ _
●●●
_ _ _ _ _ _ BC _ _ _ _ ●●●
_ _ _ _ _ _ BE _ _ _ _
●●●
_ _ _ _ _ _ BF _ _ _ _
111
_ _ _ _ _ _ BG _ _ _ _ 111
_ _ _ _ _ _ BH _ _ _ _
10 10 10
Upper Upper Insert
_ _ _ _ _ _ _ _ 4 _ _ _ ●●●
_ _ _ _ _ _ _ _ 5 _ _ _ ●●●
_ _ _ _ _ _ _ _ _ 0 _ _
●●●
Flushing _ _ _ _ _ _ _ _ _ _ 0 _ ●●●
Connections _ _ _ _ _ _ _ _ _ _ H _
●●●
and Plugs** _ _ _ _ _ _ _ _ _ _ J _
●●●
(Metal plug material
_ _ _ _ _ _ _ _ _ _ M _
●●●
will be the same as
_ _ _ _ _ _ _ _ _ _ N _
●●●
Lower material, if
_ _ _ _ _ _ _ _ _ _ P _ ●●●
metal plug is chosen -
_ _ _ _ _ _ _ _ _ _ Q _
●●●
(SS Plug for CS Lower
_ _ _ _ _ _ _ _ _ _ R _ ●●●
and Tantalum Clad)
_ _ _ _ _ _ _ _ _ _ S _
●●●
_ _ _ _ _ _ _ _ _ _ _ G
● ● ●
_ _ _ _ _ _ _ _ _ _ _ T ccc
_ _ _ _ _ _ _ _ _ _ _ L
ddd
*
Standard facing 125-250 AARH RF (raised face) serrated finish.
Table II continued below
**
Plastic Plugs are TEMPORARY ONLY to protect threads and MUST be REMOVED before installation
***
Bolt material will be same as Upper Material. However, if Table III bolt/nut option is chosen, seal bolt material will be the same.
Note:
Remote seal system pressure rating is body rating or seal rating, whichever is less.
STR14A
TABLE II - SEALS (continued)
STR12D & 13D 14G & 17G
3" _ _ _ EFA _ _ _ _ _ _
●●●
(2.8" OD
_ _ _ EFC _ _ _ _ _ _
●●●
extension)
_ _ _ EFM _ _ _ _ _ _
●●●
4" _ _ _ FGA _ _ _ _ _ _
●●●
(3.70" OD
_ _ _ FGC _ _ _ _ _ _
●●●
extension
_ _ _ FGP _ _ _ _ _ _
●●●
Diaphragm Ext. Tube
_ _ _ _ _ _ EA _ _ _ _
●●●
_ _ _ _ _ _ EB _ _ _ _
●●●
_ _ _ _ _ _ EC _ _ _ _
●●●
_ _ _ _ _ _ _ _ 7 _ _ _
●●●
_ _ _ _ _ _ _ _ 8 _ _ _
●●●
_ _ _ _ _ _ _ _ _ 0 _ _
●●●
_ _ _ _ _ _ _ _ _ _ 2 _
●●●
_ _ _ _ _ _ _ _ _ _ 4 _
●●●
_ _ _ _ _ _ _ _ _ _ 6 _ ●●●
_ _ _ _ _ _ _ _ _ _ _ 0 ●●●
Table II continued next page
ccc
316 SS
316 SS
Grafoil
Teflon
(non-asbestos)
_ _ _ _ _ _ _ _ _ _ _ K
ANSI Class 300
Hastelloy C
No Selection
316L SS
316 SS
Hastelloy C 316 SS
Hastelloy C
Extension Length 4"
6"
Carbon Steel
Hastelloy C
Wetted Material
Monel
Bolts***
Tantalum Clad
Selection
Selection
Selection
Flange Seal
with Extended
Diaphragm
Tantalum
Tantalum
316 SS
2"
ANSI Class 150
2.8"
Material (flange)
No Selection No Selection No Selection
316 SS
Wetted Material
Bolts
Non-Wetted
One 1/2" with metal plug
Two 1/2" with metal plugs
Flush Flanged
Seal with Lower
Non-Wetted Material
(upper, upper insert)
One 1/2" with plastic plug
316 SS
Hastelloy C
316 SS
316 SS
Two 1/2" with plastic plugs
3.5"
Gasket
Diaphragm
Diameter
DIN DN80-PN40
ANSI Class 300
DIN DN100-PN40
Flange
Size
Flange Pressure Rating *
Gylon 3510
Klinger C-4401
Two 1/4" with plastic plugs
Two 1/4" with metal plugs
Selection
316L SS
Hastelloy C
No Selection
None
Tantalum
Monel
One 1/4" with plastic plug
One 1/4" with metal plug
Hastelloy C
ANSI Class 150
CS (Nickel Plated)