Filter
Top Products
34-ST-03-64
Page 20
Model Selection Guide (34-ST-16-32)
Model Selection Guide
34-ST-16-32 Issue 39
Instructions
●
Select the desired Key Number. The arrow to the right marks the selection available.
●
Make one selection from each Table I and II using the column below the proper arrow.
●
Select as many Table III options as desired (if no options or approvals are desired, specify 9X).
●
A (
●
) denotes unrestricted availability. A letter denotes restricted availability.
●
Restrictions follow Table IV.
Key Number
-- - +
KEY NUMBER
* Remote seal system pressure rating is body rating or seal rating, whichever is less.
Important Note:
1
_
_
●●●
2
_
_
●
3
_
_
●
5
_
_
888
_
1
_
●●●
_
2
_
qqq
Construction
Non-Wetted Adapter Head Material
_
_
A
●
_
_
D
y
_
_
A
●
_
_
D
y
_
_
C
7
_
_
A
●
_
_
D
y
In-Line Gauge All welded
TABLE I - METER BODY
Description
STR17G
STR14G
1 Remote Seal (Low Side)
STR14A
Body Rating
*
: 500 psi (35 bar)
Fill Fluid
(Meter body)
STR12D
1 Remote Seal (High Side)
2 Remote Seals
Body Rating
*
: 2,500 psi (172 bar)
Availabilit
y
Selection
0-5 to 0-500 psia/0-0.34 to 0-35 bar
Body Rating
*
: 2,500 psi (172 bar) Compound Characterized
Body Rating
*
: 500 psi (35 bar)
STR13D
0-100 to 0-3,000 psi/0-7 bar to 210 bar
0-5 to 0-500 psi/0-0.34 bar to 0-35 bar
Single Head
Absolute
316 SS with all-welded meter body
316 SS (bolt-on heads)
Selection
316 SS Adapter Head
316 SS Head for Close-Couple
316 SS Bonnet
316 SS Bonnet for Close-Couple
316 SS for Close-Couple
Silicone (DC 200)
CTFE
Body Rating
*
: 3,000 psi (210 bar)
In-Line Gauge
IV II
XXXX
Value Added Model (VAM unit)
Dual Head DP
III (Optional)
_ _ _
I
_ _ _ _ _ _ _ _ , _ __ _ _ _ _ _ _ _ _ _ _ _
0-10" to 0-400" H
2
O/0-25 to 0-1,000 mbar
0-5 to 0-100 psi/0-0.34 to 0-7 bar
Base STR models no longer include a default communications option. All units now require the
selection of a communication option from Table III (AN, DE, HC, H6 or FF).
Number of Seals
Dual Head DP