58
Warranty and after-service / Specifications
Warranty and after-service
If a problem occurs with the equipment, first refer to the “Troubleshooting” (53~57)
and run through the suggested checks.
If this does not resolve the problem, please contact your dealer or service company.
They will tell you what warranty condition is applied.
Specifications
• These specifications are subject to change without notice.NOTE
Item Specification
Product name Liquid crystal projector
Liquid
Crystal
panel
Panel size 1.4 cm (0.55 type)
Drive system TFT active matrix
Pixels 415,272 pixels (858 horizontal x 484 vertical)
Lens F=1.65 f=20.4 mm
Lamp 165W UHB
Power Supply AC100-120V/2.7A, AC220-240V/1.5A
Power Consumption 240W
Temperature range
5 ~ 35°C (Operating)
Size
285 (W) x 73 (H) x 202 (D) mm
(Not including protruding parts)
• Please refer to the following figure.
Weight (mass)
2.2 kg
Ports
RGB input:
RGB .......D-sub 15pin mini x 1
Communication port:
CONTROL .......... D-sub 9pin x 1
Video input:
VIDEO ...................... RCA x 1
S-VIDEO .............S-Video x 1
Audio input:
AUDIO ...........
Stereo mini x 1
Optional
parts
Lamp DT00707
Air filter
NJ22642
Others • Please consult your dealer.
Downloaded from www.Manualslib.com manuals search engine