Filter
Top Products
40
Item Description
ZOOM
Using the buttons ▲/▼ adjusts the zoom (magnifying power).
Large
Small
KEYSTONE
Using the buttons ▲/▼ corrects the keystone distortion.
Upper in the data
Lower in the data
• The adjustable range for correction will vary among inputs. For
some signals, this function may not work well.
• When the V:INVERT or H&V:INVERT is selected under the
MIRROR item in the SETUP menu, if the projector screen is inclined
or angled downward, this function may not work correctly.
• While setting the WIDE mode for aspect ratio, the correction of
keystone distortion is not effective.
(23, 36)
WHISPER
Using the buttons ▲/▼ turns off/on the whisper mode.
NORMAL
WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
MIRROR
Using the buttons ▲/▼ switches the mode for mirror status.
NORMAL
H:INVERT
V:INVERT
H&V:INVERT
VOLUME
Using the buttons ▲/▼ adjusts the volume.
High
Low
Multifunctional settings
With the SETUP menu, the items shown in the table below
can be performed.
Choose an item using the cursor buttons ▲/▼ on the
projector or remote control, and press the cursor button ►
on the projector or remote control, or the ENTER button
on the remote control to execute the item. Then perform it
referring to the following table.
SETUP menu
MENU
[
RGB
]
:SELECT
ZOOM
KEYSTONE
WHISPER
MIRROR
VOLUM
E
100
+0
NORMAL
NORMAL
16
PICTURE
IMAGE
INPUT
SETUP
SCREEN
OPTION
EASY MEN
U
Downloaded from www.Manualslib.com manuals search engine