Filter
Top Products
25
Chapter 2 - Software Overview Measurement Settings
Measurement Settings
Receive Instrument -Spctrum Analyzer Settings
Bandwidth- Sets the bandwidth window on the
spectrum analyzer , the smaller the window the faster
the sweep. Format is in GHz.
Resolution-Sets the Frequency Resolution of the
spectrum analyzer sweep. Inplut format is in MHz.
Trigger Mode- Changes the way the power meter
reads the sensor, this setting is only applied to
certain meters.
Trigger Delay- This sets the delay / Settling time
between when the Signal generator is called and the
power meter is queried for a reading. format is in
seconds. Example: 1/10 second = .10
Sweep Delay- this sets the number of seconds the
signal generator will wait before initiating the sweep.
this allows larger antennas a chance to completely
stop moving.