Filter
Top Products
13
PLAYING TRACKS IN RANDOM ORDER
With play stopped, press RANDOM. RANDOM appears on
the display, and random play starts in the selected play
mode.
SINGLE - randomly plays all of the current CD’s tracks.
Once all the CD’s tracks have played, the CD changer stops.
ALL - selects a track from a CD and plays the track, then
repeatedly selects another CD and plays another track. When
the CD changer finishes playing 100 selections (or as many
as possible from the CDs that are loaded), it stops.
CUSTOM - selects a track from a CD in a custom CD group
and plays the track, then repeatedly selects another CD in
the same group and plays another track. When the CD
changer finishes playing 100 selections (or as many as
possible from the CDs that are loaded), it stops.
To cancel random play and continue normal play, select a
disc other than the one currently playing, either by
pressing 2 DISC NUMBER 3 or by using the remote
control’s number buttons, then pressing DISC SET. To stop
random play, press 7.
Notes:
• During play, press RANDOM to skip the track currently
playing and advance to the next random selection.
• You can switch between the ALL or SINGLE modes
during random play.
• If the CD changer does not have 100 CDs loaded, the
CD changer might select the same track or CD more
than once.
• You can use repeat during random play.
• If you start random play during programmed play, the
program’s contents are erased and the CD changer starts
ALL random play.
PROGRAMMING A SEQUENCE
You can program up to 36 selections from all loaded CDs
to play in any order you choose. A selection can be a
single track or an entire CD.
Follow these steps to program a sequence.
1. Press 7 to cancel the current function.
2. Press PGM on the remote control (or PROGRAM on
the front panel). PGM appears on the display.
3. Select the CD that contains the first track you want to
program using the remote control’s number buttons and
DISC SET. The selected CD’s number and AL appear.
You can also use 2 DISC NUMBER 3 (or 2 DISC 3 on
the remote) and press PGM to select a CD. The disc
number and AL appear. If you do not select a track
within about 2 seconds, the entire CD is automatically
stored.
If you program an entire CD, skip to Step 5.
4. Select the track you want to program using the remote
control’s number buttons and TRACK SET.
The displayed track and disc numbers are stored in the
first memory position.
You can also use ¢ or 4 then press PGM (or
PROGRAM) to select a track.
5. Repeat Steps 3 and 4 for each track or CD you want to
program, up to 36 selections.
6. Press 6. The CD changer plays the sequence.
Notes:
• If you try to program a nonexistent CD or track
(for example track 10 when a CD has only nine
tracks), the CD changer ignores the entry.
• Press ¡ ¢ or 4 1 to move forward or
backward through the programmed sequence while
the sequence plays.
After the CD changer plays the last track in the
programmed sequence, it stops, but the programmed
sequence is still in memory. Press PGM then 3 to restart
programmed play.
To clear the sequence, see “Clearing a Programmed
Sequence” on Page 14.