Filter
Top Products
12
STORING YOUR BEST TRACKS
You can save up to 20 tracks in a special best memory, and
then replay them at any time. To save a track in best
memory, just press BEST while that track is playing. BEST
flashes three times. To play the tracks you have saved in
best memory, press BEST while the changer is stopped.
The CD changer plays in the reverse order; the last track
you saved plays first.
Notes:
• The changer only remembers the last 20 tracks you
stored in best memory.
• You cannot store the same track twice in succession.
• You cannot save a track from a CD that is in the single
play slot into best memory.
• To clear a track from best memory, press CLEAR while
that track is playing.
• The best memory is kept even after you turn off the CD
changer.
• The changer keeps the tracks in best memory for a few
minutes in the event of a power loss.
SCANNING PREVIOUS CDS
The CD changer remembers the 20 most recently played
CDs and lets you review and replay them in reverse order.
To review the CDs, press PREVIOUS. PREVIOUS SCAN
flashes and the changer plays 10 seconds of the first track
of each of the last 20 CDs you played, starting at l minute
into the first track on each CD. To listen to an entire CD
and cancel the previous scan function, press 6.
To stop the previous scan function, press 7.
Notes:
• If a track is less than 1 minute long, previous scan starts
at the beginning of the track.
• A CD in the single play slot is not included in the
previous scan memory. Neither are any CDs played
using random play, hi-lite scan, programmed play, and
best selection.
• The previous scan memory remains stored even after
you turn off the CD changer.
• The changer keeps the CDs stored in previous scan
memory for a few minutes in the event of a power loss.
USING HI-LITE SCAN
To listen to 10 seconds from each CD, press Hl-LITE
while the changer is stopped or during normal play. DISC
SCAN flashes and the changer plays 10 seconds from each
CD, starting at 1 minute into the first track.
To listen to 10 seconds from every track on all CDs,
press HI-LITE twice while the changer is stopped or during
normal, programmed, or favorite track play. SCAN flashes
and the changer plays 10 seconds from each track, starting
at 1 minute into each track.
To stop scanning, either press 6 to start play at the
current track or press 7 to stop play.
Notes:
• If the track is less than 1 minute long, hi-lite scan starts
at the beginning of the track.
• You can use ¡ ¢ and 4 1 to skip forward
and backward.
• You can use repeat during hi-lite scan (see “Repeating
Tracks, CDs, and Sequences”).
REPEATING TRACKS, CDS, AND SEQUENCES
Your CD changer can repeat a single track, a single CD, all
loaded CDs, a custom CD group, or a programmed
sequence.
To repeat a single track, before or during play of a track
you want to repeat, press REPEAT on the remote control.
REPEAT 3 1 appears on the display. If the CD changer is
stopped, press 6. At the end of the track, the CD
changer replays the track.
To repeat a single CD, before or during play, repeatedly
press MODE until SINGLE appears on the display, then
press REPEAT twice. REPEAT appears on the display. If
the CD changer is stopped, press 6. When the CD
changer reaches the end of the CD, it replays the CD.
To repeat all CDs, before or during play, repeatedly
press MODE until ALL appears on the display, then press
REPEAT twice. REPEAT appears on the display. If the CD
changer is stopped, press 6. When the CD changer
reaches the end of the last CD, it replays all loaded CDs in
order.
To repeat CDs in a custom group, before play,
repeatedly press MODE until CUSTOM and the number of
the desired group appear on the display, then press
REPEAT twice. REPEAT appears on the display. If the CD
changer is stopped, press 6. When the CD changer
reaches the end of the last CD, it replays all CDs in the
group in order.
To cancel repeat play, press REPEAT until neither
REPEAT 1 nor REPEAT appears on the display, or
press 7.