GoVideo DHT7100 Home Theater System User Manual


 
20
DVD System User’s Guide
4
This chapter shows how to fine tune your speaker settings, including size, delay, balance
and levels. You can also set language preferences, screen size, and digital output.
ADVANCED SETUP
SPEAKER SETUP
SETTING SPEAKER SIZES
Press the SPK MODE button repeatedly to
set the relative size of each speaker:
Front Speaker Size
Press the LEFT/RIGHT ARROW keys to
select SMALL (default) or LARGE.
Center Speaker Size
Press the LEFT/RIGHT ARROW keys to
select SMALL (default), LARGE or NONE.
Rear Speaker Size
Press the LEFT/RIGHT ARROW keys to
select SMALL (default), LARGE or NONE.
Subwoofer Size
Press the LEFT/RIGHT ARROW keys to
select USE (default) or NONE.
ADDING CENTER & REAR DELAYS
If your center and/or rear speakers are
closer to your primary listening area than
your front speakers, you can add a delay so
that the sound from all five speakers arrives
at approximately the same time. Assume 1
MS (millisecond) of delay for every one foot
of distance; see “Calculating Delays” on
page 21.
Press the SPK MODE button repeatedly to
adjust each of the following:
Center Delay
Press the LEFT/RIGHT ARROW keys to set
the center speaker delay from 0-5MS.
Rear Delay
Press the LEFT/RIGHT ARROW keys to set
the rear speaker level from 0-10MS.
SPK Mode
C - DEL 00MS
R - DEL 00MS
F - SP SMALL
C - SP SMALL
R - SP SMALL
SW - SP USE
NOTE
It is not necessary to change speaker size
settings unless you are connecting different
speakers to the unit.
Be sure to use speakers with the same
specifications (see p. 28)