Fluke 433 Stereo System User Manual


 
Fluke 433/434
Users Manual
18-2
Figure 18-1. Welcome screen at power-on
The Settings are grouped in four functional sections and are explained accordingly in four
sections of this manual chapter:
General Settings: Date, Time, wiring Configuration, nominal Voltage, nominal
Frequency, current and voltage probe type, information language, survey and
installation of options.
FUNCTION PREFerences: adjustment of Offset and Span of Trend and Waveform
displays, contents of harmonics table and harmonics settings, power settings, flicker
D-parameter settings, Inrush defaults, and Transient settings. Function key F4 in
these menus gives a reset to factory default settings. Default settings usually give a
good display.
USER PREFerences: adjustment of Phase Identification and Colors, Printer and RS-
232 settings, Auto shut-off, definition of User name (as shown in entry screen), and
display contrast. Many menus have a function key for reset to factory default settings.
Limits Settings: for save, recall, and definition of the limits for power quality
monitoring.
The figure below shows the entry menu present under the SETUP key.
Entering the Setup menu:
c
SETUP
Menu navigation and selections:
Selection of the item to be adjusted.
ENTER
Press to access the selected settings menu.
To select (up/down) and adjust (left/right) items in a settings
menu.
F5
Confirm the selection and return to previous menu.