Fluke 433/434
Users Manual
21-14
Printers and Interface
Item Specification Additional Information
Type RS-232, optically isolated
To be used with interface cable to
RS-232 with 9-pole D-plug male (
PM9080) or USB (OC4USB)
Spacing
“0”
“1”
Light
No light
Baud rate 1200, 2400, 9600 … 57k6
Stop bits 1
Data bits 8
Parity No
Transmission mode Asynchronous, full duplex
Handshake Xon Xoff
Software handshake only.
Print out facility Via optical RS-232
Via serial/parallel converter
PM9080 or PAC 91
Protocol
Epson FX LQ compatible,
Deskjet, LaserJet , DPU-414,
PostScript
Pure B&W.
Power Supply and Battery Charger
Item Specification Additional Information
Operating Time 7 hours With Backlight at low intensity
Charge Time 4 hours, 8 hours for /006 version If instrument is Off
Allowed ambient temperature
during charge
0 °C ... 40 °C
Remaining Battery Time indicator Yes, in five steps, NOT
guaranteed
The instrument will show a
remaining battery capacity. This
indication has no absolute
accuracy; it is only used as an
indication.
Power adapter input
Voltage
15 ... 23 V dc Use only power adapter BC430.
NiMH Battery Pack
BP190