Fender Champion 90 Speaker User Manual


 
ENGLISH
9
9
fender.com
Rear Panel
Rear Panel
Effects
Effects
Vibratone 1 slow
Vibratone 2 fast
Chorus 1 slow
Chorus 2 fast
Reverb + Chorus 1 large room / slow chorus
Reverb + Chorus2 medium hall / fast chorus
Chorus + Delay fast chorus / long delay (480 ms)
Delay 1 slapback delay (140 ms)
Delay 2 medium delay (315 ms)
Delay 3 long delay (480 ms)
Reverb + Delay1 medium hall / medium delay (235 ms)
Reverb + Delay2 medium hall / long delay (415 ms)
Plate Reverb studio plate
Room Reverb medium room
Hall Reverb 1 medium hall
Hall Reverb 2 large hall
Vibratone fast
Chorus slow
Reverb + Chorus1 large room / slow chorus
Reverb + Chorus2 medium hall / fast chorus
Chorus + Delay fast chorus / long delay (480 ms)
Delay 1 slapback delay (140 ms)
Delay 2 medium delay (315 ms)
Delay 3 long delay (480 ms)
Reverb + Delay1 medium hall / medium delay (235 ms)
Reverb + Delay2 medium hall / long delay (415 ms)
Plate Reverb studio plate
Room Reverb 1 dark medium room
Room Reverb 2 bright medium room
Hall Reverb 1 small hall
Hall Reverb 2 medium hall
Hall Reverb 3 large hall
Specifications
TYPE: PR 899
POWER REQUIREMENTS: 350W OUTPUT: 90W RMS into 8Ω @ <0.2%THD
INPUT IMPEDANCE INSTRUMENT: 10MΩ MIC/INST: 3.6kΩ
SPEAKER: One 8Ω, 8" Fender Special Design (P/N 0092459000) One Piezo horn (P/N 0080886000)
FOOTSWITCH (OPTIONAL): Two-button, Effects on-off (P/N: 0064673000)
DIMENSIONS HEIGHT: 15 3/8 in (39.1 cm) WIDTH: 19 3/8 in (49.2 cm) DEPTH: 19 13/16 in (24.9 cm)
WEIGHT: 18 lb (8.16 kg)
Product specifications are subject to change without notice.
N. POWER — Switch to the "ON" position to turn the unit on. Switch
to the "OFF" position to turn the unit o .
O. INPUT POWER — Connect the included power cord to a grounded
outlet in accordance with the voltage and frequency ratings
speci ed on the rear panel of your ampli er.
P. FOOTSWITCH — Connect the optional 2-button footswitch
(P/N0064673000) to enable remote on/o switching of the e ects
for each channel.
Q. GROUND LIFT — Press in to disconnect the ground connection
(pin 1) of the BALANCED LINE OUT {R} jack, which may reduce line
noise in some situations. Normally leave this button in the "out"
position (grounded).
R. BALANCED LINE OUT — XLR output jack for connection to
external sound equipment.
S. AUX — Auxiliary input jack. Connect your media playback device
here to play an accompaniment track through the ampli er. Adjust
the auxiliary input level using the volume control on the playback
device.
Instrument Channel
Select from 16 variations of 9 types of
effects using the FX SELECT knob. Effects are
described going clockwise around the knob:
Mic/Inst Channel
Select from 16 variations of 9 types of
effects using the FX SELECT knob. Effects are
described going clockwise around the knob: