Event ID code Cause and solution
0022 Unstable network communication. Check the network communication status, wait a
few moments, and try connecting to the network again.
0027
0028
0029
0030
0031
0035
0434
0481
0482
0485
0023 Connection failed. If you see the PIN entry screen on your computer, enter the PIN
code displayed on the Screen Mirroring standby screen or at the bottom right of the
0024
projected image. If this does not solve the problem, restart the projector and
0025 connected devices, then check the connection settings.
0432 The EasyMP Network Projection program did not start. Turn the projector off and
then on again.
0435
0433 Cannot display the transferred images. Restart the EasyMP Network Projection
program.
0484 Communication with computer was disconnected. Restart the EasyMP Network
Projection program.
0483 The EasyMP Network Projection program quit unexpectedly. Check the network
communication status, then turn the projector off and then on again.
04FE
0479 A projector system error has occurred. Turn the projector off and then on again.
04FF
0891 Cannot find an access point with the same SSID. Set your computer, access point,
and projector to the same SSID.
106