Filter
Top Products
54
Maintaining and Transporting the Projector
4. If you need to replace the filter, use a small screwdriver to pry it
off.
5. To install the new filter, first insert the tab, then press down until
it clicks in place.
Replacing the Lamp
The projection lamp typically lasts for about 1000 hours of use. It is
time to replace the lamp when:
■
The projected image gets darker or starts to deteriorate.
■
The lamp warning light is red, flashing red, or flashing
orange.
■
The message
LAMP REPLACE
appears on the screen when the
lamp comes on (after about 900 hours of use). To maintain
projector brightness and image quality, replace the lamp as soon
as possible.
Contact your dealer or call EPSON at (800) 873-7766 in the United
States and Canada for a replacement lamp. Request part number
ELPLP14
.
note
You can check to see how
many hours the lamp has
been used. See page 49.