Filter
Top Products
Fine-tuning the Projector
41
Adjusting Image Appearance
Follow these steps to adjust the appearance of your image:
1. Press the
Menu
button. You see the main menu.
2. Press
Enter
to select the Video menu.
3. Use the
Enter
button to set one of the following options:
■
Tracking (computer images only)
Removes unwanted vertical lines from a computer image by
matching the projector’s internal clock to various computer
signals.
■
Sync (computer images only)
Corrects fuzziness or screen flicker by synchronizing the
projector with the tracking signal sent from the computer.
■
Brightness
Lightens or darkens the overall image.
■
Contrast
Adjusts the difference between light and dark areas.
■
Color
Adjusts the depth or intensity of the image. For computer
images, lets you adjust individual red, green, and blue values.
■
Tint (video only)
Adjusts the balance of green to magenta in the image.
■
Sharpness
Sharpens or softens the image.
■
Auto Setup
Leave this setting
ON
to automatically optimize the computer
image. Turn it off if you want to save adjustments you have
made to the video settings.
■
Gamma
Adjusts overall brightness, contrast, and color balance.
4. When the image is set correctly, press
Esc
or
Menu
. Your settings
are automatically saved.