Emerson ES88 Speaker System User Manual


 
4
PREPARATION FOR USE
UNPACKING AND SET UP
This system consists of the following components: Tuner/CD Player unit with
built in subwoofer, a single Thinovation™ Flat Speaker Panel, a full-function
Remote Control and a detachable AC power cord.
Carefully remove all the components from the display carton and verify that
you have all the necessary components before you dispose of the display
carton.
Remove all packing materials from the individual components. Remove any
descriptive labels that may be attached to the front panel of the main unit. Do
not remove any labels or stickers on the back panels of the main unit or the
speakers.
Place all the components in the desired location. This system is designed to
be used on level, stable, flat surface such as a table, desk, shelf, or stand,
convenient to an AC outlet, out of direct sunlight, and away from sources of
excess heat, dust, moisture, or vibration.
Unwind the lead wire FM antenna on the back of the Tuner/CD Player unit and
extend it to its full length.
The main unit is shipped with a dummy CDdisplay card in the CD player.
This dummy CDcard must be removed before you can use the CD player.
ES88_ib072503.p65 25/7/2003, 10:094