Filter
Top Products
15
LISTENING TO THE RADIO
1.) Press the POWER/STANDBY button on the main unit or the remote control.
The main display turns on.
2.) If necessary, press the TUNER button
on the front panel of the main unit or
the FUNCTION button on the remote
control to select the Tuner function. The
display will show an AM or FM station
frequency. To select a different band,
press the STOP/BAND button.
3.) Tune to the desired frequency as follows:
• Manual Tuning
Repeatedly press the or buttons on the front panel of the main unit or
on the remote control until the frequency of the desired station appears on the
display.
• Automatic Tuning
Press and hold the or buttons on the front panel of the main unit or on
the remote control until the display begins to move, then release the buttons.
The tuner will search up or down the band for the next strong station and stop
on that station. Repeat this procedure until the tuner stops on your desired
station.
4.) Adjust the VOLUME controls as
desired. If you tuned to an FM Stereo
station the ST indicator will appear in
the main display.
5.) When you are finished listening press the POWER/STANDBY button on the
main unit or remote control to return to the Standby (Power Off) mode. The
main display goes off and the time display reappears.
ES88_ib072503.p65 25/7/2003, 10:0915