Filter
Top Products
24
PROGRAMMED PLAYBACK
This system has a 20 track programmable memory. You can program up to 20
tracks on a disc to play back in any desired order.
NOTE: You cannot program the player while a disc is playing. You must press
the STOP/BAND button first to stop playback before beginning the
programming steps below.
1.) Load your disc as usual and wait until the display shows the total playing time
and number of tracks.
2.) Press the MEMORY/CLOCK ADJ.
button on the front panel or the remote
control. The MEMORY indicator flashes
and the display show track number “01”
and Program Memory number “P–01”.
3.) Press the or button on the front panel of the main unit or the remote
control to select the first track you wish to program.
Example: Track 07.
4.) Press the MEMORY/CLOCK ADJ.
button again to enter Track 07 in
Program Memory “01”. The Program
number advances to “P-02” and the
track display shows “00”.
5.) Repeat Steps 3 and 4, selecting a different track number each time until you
have entered up to 20 tracks in the memory.
ES88_ib072503.p65 25/7/2003, 10:0924