Filter
Top Products
27
TIMER Function (Remote Control Only)
This system includes a programmable Timer function that will turn the system ‘On,
play for one hour, and then shut the system ‘Off’ automatically. You can use the
timer to wake you up to the radio or to your favorite CD. The timer can be
programmed while the system is in the Standby (Power Off) mode, the Tuner
mode or the CD mode.
To Set The Turn On Time
1.) Press and hold the SLEEP/TIMER
button on the front panel or the TIMER
button on the remote control until
“12:00 AM” appears and the TIMER
indicator begins flashing in the display,
then press the MEMORY/CLOCK ADJ.
button for at least 3 seconds. The Hour digits begin to flash
2.) Press the or button on the front panel of the main unit or the remote
control to set the display to the desired turn on hour, AM or PM.
3.) Press the MEMORY/CLOCK-ADJ.
button on the front panel or remote
control. The Minute digits begin flashing.
4.) Press the or buttons on the front panel of the main unit or the remote
control to set the display to the desired turn on minute.
5.) Press the MEMORY/CLOCK-ADJ.
button once more to enter the turn on
time in the memory. After a few seconds
the TIMER display stops flashing and
remains ‘On’ and the display returns to
the correct time, the Tuner display, or
the CD display.
ES88_ib072503.p65 25/7/2003, 10:0927