Filter
Top Products
13
SETTING THE CLOCK
When the system is connected to the AC outlet for the first time the STANDBY
LED indicator on the front panel glows red and “0:00” appears on the display. This
is your indication that the time display is incorrect and needs to be reset.
NOTE:
The clock can only be set while the system is in the Standby (Power ‘Off’)
mode.
1.) Press the MEMORY/CLOCK-ADJ.
button on the front panel or the remote
control for at least 3 seconds.
“24H” will begin flashing in the display
indicating that the clock is set for 24-hour “European” time.
(Example: 6:00 PM is shown as 18:00)
2.) Press either the F-SKIP/UP or R-SKIP/DOWN button on the front panel
of the main unit or on the remote control
once to change the clock format to 12
Hour “American” time. The display will
change from “24H” to “12H”.
3.) Press the MEMORY/CLOCK-ADJ.
button again. The Hour digits will begin
flashing.
ES88_ib072503.p65 25/7/2003, 10:0913