Filter
Top Products
Connecting your equipment
03
34
En
Connecting a USB device
It is possible to play audio and photo files by connecting
USB devices to this receiver. It is also possible to connect
a USB keyboard (US-international layout) to the receiver
to enter text in the following GUI screens.
• Change the input name in the Input Setup menu
(page 39).
•Add names to radio station presets
(page 45).
•Enter Internet radio station URLs
(page 46)
.
• Switch the receiver into standby then connect your
USB device to the USB terminal on the front panel of
this receiver.
1
•For instructions on playing the USB device, see
Playing a USB device on page 42.
Connecting a USB device for Advanced
MCACC output
When using Auto MCACC (page 73) or Acoustic
Calibration EQ Professional (page 77) to calibrate the
reverb characteristics of your listening room, the 3D
graphs of the reverb characteristics in your listening
room (before and after calibration) can be checked on a
computer screen.
The various MCACC parameters can also be checked on
the computer. MCACC data and parameters are
transferred from this receiver to a USB device and by
connecting the USB device to a computer, the data is
imported via the MCACC software in the comput
er.
The MC
ACC software to output the results is available
from the support area of the Pioneer website (http://
www.pioneerelectronics.com/PUSA/
Home+Entertainment+Custom+Install). Instructions
for using the software are also available here. If you have
any questions regarding, please contact the Customer
Support Division of Pioneer.
See the documentation provided with the Advanced
MCACC PC Display Application Software for more
information.
•For the USB device connection and operations, see
Output MCACC data on page 80
2
.
Note
1This receiver does not support a USB hub.
MASTER
VOLUME
MCACC SETUP MIC
USB
iPod
iPhone
VIDEO
CAMERA
HDMI 5
CONTROL ON
/
OFF
USB mass
storage device
USB keyboard
2The various parameters and the reverb characteristics data used for display on the computer ar e not cleared when the power is turned off (see
Output MCACC data on page 80).
VSX-33_UXJCB.book 34 ページ ２０１０年３月９日 火曜日 午前１０時３９分