Filter
Top Products
31
Remote Controllable
Cable Box Codes
Programming the Remote
Programming the Remote to Control a
Cable Box
Refer to the cable box connection page or contact your cable
company to hook up your cable box. You may be able to
program the remote for your remote controllable cable box.
Use the codes in the code list on the right or on the sheet
packed with your remote.
1. Turn on the cable box.
2. Look up the cable box brand and its code
number(s) in the code list on the next page or on
the code sheet packed with the remote.
3. Press and hold the SAT•CABLE button on
the remote.
4. Enter the three-digit code from the code list.
5. Release the SAT•CABLE button, then press POWER
or CH + or CH – to see if the cable box responds to
the remote commands. If not, try pressing
SAT•CABLE, then POWER again to see if the cable
box responds.
6. Repeat steps 3 through 5 using the next code listed
for the brand of your cable box until the cable box
responds to the remote commands.
This remote may not operate all
models of the brands shown.
ABC 022, 046, 053, 054
Anvision 007, 008
Cablestar 007, 008
Diamond 056
Eagle 007, 008
Eastern International 002
General Instrument 046
GI 400 004, 005, 015, 023,
024, 025, 030, 036
Hamlin 003, 012, 013, 034, 048
Hitachi 037, 043, 046
Jerrold 004, 005, 015, 023,
024, 025, 030, 036, 045,
046, 047, 062, 065
Macom 037, 043
Magnavox 007, 008, 019, 021,
026, 028, 029, 032, 033,
040, 041
NSC 009
Oak 001, 016, 038
Oak Sigma 016
Panasonic 003, 027, 039, 061
Philips 007, 008, 019, 021, 026,
028, 029, 032, 033, 040,
041
Pioneer 018, 020, 044
Randtek 007, 008
RCA 000, 027
Regal 003, 012, 013
Regency 002, 033
Samsung 044
Scientific Atlanta 003, 022, 035, 063, 064
Signature 046
Sprucer 027
Starcom 046
Stargate 2000 058
Sylvania 011, 059
Teknika 006
Texscan 010, 011, 059
Tocom 017, 021, 049, 050, 055
Unika 031, 032, 041
Universal 051, 052, 060
Viewstar 007, 008, 019, 021, 026,
028, 029, 032, 033, 040,
041
Warner Amex 044
Zenith 014, 042, 057, 061