Filter
Top Products
19
Tour of the Receiver
You can program the remote to
operate many other brands of
audio and video components. See
Chapter 4, Programming the
Remote for details.
Surround Sound Level Controls
+ Increases the volume in rear and center speakers.
— Decreases the volume in rear and center speaker.
BY-PASS Turns on and off By-Pass mode, which cancels all
Surround sound modes. Sound is generated without effects.
REAR•CTR LEVEL Adjusts the balance level of the rear and
center speakers. Press once for Rear. Press again for Center.
Receiver/Tuner Controls
CH + and CH – Tune the receiver to the next or previous
preset station stored in the receiver’s memory.
FWD Lets you manually move up the AM/FM band.
INPUT•SEEK Searches for and stops on AM/FM stations with
signals of sufficient strength.
MENU SELECT Stores the selected station in the
receiver’s memory.
Number Buttons Let you enter numbers when needed.
REV Lets you manually move down the AM/FM band.
TV Controls
+ On some RCA TV models, used to adjust menu controls.
— On some RCA TV models, used to adjust menu controls.
ANTENNA Changes the antenna input.
CHAN + and CHAN — Tunes the TV channel up and down.
CLEAR Removes any menu from the screen.
DELAY/CH CTRL In some RCA TV models, lets you control the
channel that appears in the PIP window or the main screen in
PIP mode.
GO BACK•DISC Returns to the previous channel.
GUIDE•RDM For some models, brings up 12 small pictures
(previews of the next 12 channels in the channel list). Press
again to turn off channel guide.
INFO Displays channel information.
INPUT•SEEK For some TV models, toggles through the
available input sources.
MENU SELECT For some models, stores channels in the TV’s
memory.