Dolby Laboratories CD Player CD Player User Manual


 
Surround
(Rear)Speakers
(Left and Right)
DO
Centre
Speaker
a
o I [:JD :
~ 00
~
Speaker Positioning Instructions
Place the Main Left Speaker to the left of the audio system as
seen from the front of the audio system. Place the Main Right
Speaker to the right of the audio system as seen from the front
of the audio system.
Place the Centre Speaker on top, below, or at the front of the
audio system.
Place the Surround (Rear) Speakers behind and aimed toward
the viewing area. The viewing/listening area should be between
the audio system and the Surround (Rear) Speakers.
a-- Main speaker (UR)
b-- The audio system
c-- Centre speaker
d-- Surround (Rear) Speaker (UR)
e-- Viewing / listening area
Surround
(Rear)
Speaker
Wall mountable Surround(Rear) Speakers
1. Mark the correct mounting position on the wall.
2. Insert a screw and screw them at the marked position on the
wall.
3. Align the slot holes of the speaker over the screw and pull
the speaker downward until it is firmly hooked.
E-4
~~y...;",""",,-:.~
Speaker Connections
1. Connect Main Speaker wires (Left & Right) from the Main Speaker to the amplifier's 'MAIN' speake
terminals.
2. Connect Surround (Rear) Speakers wires (Left & Right) from the Surround (Rear) Speaker to the amplifiel\
Surround (Rear) speaker terminals.
3. Connect Centre Speaker wires from the Centre Speaker to the amplifier's centre terminal.
NOTE: Ensure in each case that the striped (+) wire is connected to the (+) terminal of the speaker outpU
and the non-striped wire (-) is connected to the terminal of the speaker output. Also ensure that the correQ
orientation for left and right main speakers is observed.
Main Speakers (Left and Right)