Filter
Top Products
RECORDING FROM THE CD PLAYER
i
t
~
~
.
:t:
~;I
;1
i
"
~
I
I
TO ERASE A RECORDED TAPE
1) Press the FUNCTION button to TAPE.
2) Insert a tape with the side you want to erase facing
you.
3) Press the RECORD button to start erasing.
TO STOP RECORDING
Press the STOP/EJECT button of Deck A.
TO INTERRUPT RECORDING
Press the PAUSE button of Deck A.
To resume recording; press the PAUSE button again.
REMOTE CONTROL
1) SPEAKERS RESET button
2) SLEEPbutton
3) BALANCE UR, SPEAKER '+'1'.' buttons
4) FUNCTION button
5) TUNINGUPIDOWNIREPEATIRANDOM
buttons
6) DOLBY 3 STEREO button
7) SKIPISEARCI-VPRESET buttons
8) STOP button
9) TIMERbutton
10) TESTbutton
11) MEMORYbutton
12) OPEN/CLOSE button
13) BANDbutton
14) PRESETEQbutton
15) X-BASSbutton
16) PRO LOGIC button
17) VOLUMEcontrolbuttons
18) PlAY/PAUSEbutton
19) POWEFI/STANDBY
button
20) DISC SKIP button
1
!1
USING THE REMOTE CONTROL CORRECTL y
.Point the Remote Control at the REMOTE SENSOR located on the unit.
.When there isa strong ambient light source, the performance of the infrared REMOTE
SENSOR may be degraded, causing unreliable operation.
.The recommended effective distance for remote operation is about 6 meters(19feet).
BATTERY REPLACEMENT
When batteries become weak, the
operating distance of the Remote
Control is greatly reduced and you
will need to replace the batteries.
NOTE:
If the Remote Control is not going to
be used for a long time, remove the
batteries to avoid damage caused by
battery leakage corrosion.
TO INSTALL BATTERIES
1. Open the battery door.
2. Insert two RO3 (MA or UM-4)
size batteries.
E-21