Filter
Top Products
ENGLISH
25
2. Mix mode
★ In the mix mode, programmed play and random play of the disc in the CD unit and the one in the CD-R unit can be performed as
if the two discs were a single disc.
(1) Mix programmed playback
STOP
PAUS E
PLAY
2
4
3
78
56
1
9
10
+
10
REC
_
DUBBING
_
NORMAL HIGH
RELAY
MODE
CD CD-R
ENTER
MENU
8
9
3
2
6
7
PROG/DIRECT
CALL
RANDOM
DISPLAY SEL
.
FADER INPUT FINALIZE
1 / ALL A - B
CHARACTER
TIME
TITLE
B
REMOTE CONTROL UNIT RC-278
M
+✽ –
CLEARCLEAR
A ! "
J
( )
D # % G & '
P
,
Y
< < >
V
:
;
S
.
[ = ] {
?
}
OPEN / CLOSE
TIME
TIME
CLEAR INPUT
MENU
5
OPEN /CLOSE
5
PROFESSIONAL CD RECORDER DN-C550R
PHONES PHONES LEVEL
MIN
MAX
POWER
ON
OFF
FINALIZE
MULTI JOG
3
1
2
3
1
2
REMOTE SENSOR
PLAY STOP PAUSE
HIGHNORMAL
DUBBING
8
9
RELAY MODE
DISPLAY
SELECT
TITLE /
CHARACTER
PUSH
ENTER
8
9
PLAY STOP PAUSE
4
REC
-
+
115 52
1 1
5
2
4
4
3
1
Load the discs you want to play in the CD and CD-R units.
2
Press the RELAY MODE button and select “Mix Play”.
• The “MIX” indicator lights.
3
Press the CD or CD-R unit’s PROG/DIRECT button on the remote control unit to set the program mode.
• The “PROG” indicator lights.
4
Follow the procedure at “Programmed playback” on Page 21 to program the tracks in the order in which you want to
play them.
• You can program tracks for both the CD and CD-R units by using the CD/CD-R selector switch on the remote control
unit to switch between them.
• Up to 30 tracks can be programmed.
5
Mix programmed playback starts when the CD or CD-R unit’s play button is pressed.
• The sound is output from the CD/CD-R output jacks.
• To quit the mix mode, press the relay mode button and select “Single Play”.
(Main unit)
(Remote control unit)
1. Relay play
★ With the relay play mode it is possible to play the disc in the CD side and the one in the CD-R side, relaying between them.
★ The programmed play and random play modes can be preset for the discs in the CD and CD-R units.
STOP
PAUS E
PLAY
2
4
3
78
56
1
9
10
+
10
REC
_
DUBBING
_
NORMAL HIGH
RELAY
MODE
CD CD-R
ENTER
MENU
8
9
3
2
6
7
PROG/DIRECT
CALL
RANDOM
DISPLAY SEL
.
FADER INPUT FINALIZE
1 / ALL A - B
CHARACTER
TIME
TITLE
M
+✽ –
CLEARCLEAR
A ! "
J
( )
D # % G & '
P
,
Y
< < >
V
:
;
S
.
[ = ] {
?
}
OPEN / CLOSE
TIME
TIME
CLEAR INPUT
MENU
5
OPEN /CLOSE
5
PROFESSIONAL CD RECORDER DN-C550R
PHONES PHONES LEVEL
MIN
MAX
POWER
ON
OFF
FINALIZE
MULTI JOG
3
1
2
3
1
2
REMOTE SENSOR
PLAY STOP PAUSE
HIGHNORMAL
DUBBING
8
9
RELAY MODE
DISPLAY
SELECT
TITLE /
CHARACTER
PUSH
ENTER
8
9
PLAY STOP PAUSE
4
REC
-
+
114 2
1 1
2
4
3
1
Load the discs you want to play in the CD and CD-R units.
2
Press the RELAY MODE button and select “Relay Play”.
• The “RELAY” indicator lights.
3
Use the CD or CD-R section repeat 1/ALL button on the remote control unit to turn the repeat mode on or off.
• The 1-track repeat mode cannot be set in the relay mode.
• The relay operation is performed as shown below according to the combination of the relay and repeat modes:
4
Relay play starts when the CD unit’s play button is pressed.
• The sound is output from the CD/CD-R output jacks.
• To quit the relay mode, press the relay mode button and select “Single Play”.
• The disc in the side that is not operating can be replaced during relay playback.
Repeat mode Relay operation
Repeat on: “REPEAT”
indicator lit
Repeat off CD side playback CD-R side playback Stop
1 1
CD side playback CD-R side playback
11
(Main unit)
(Remote control unit)
Select the CD side.
NOTE:
• When relaying between a CD and CD-R, the digital data from the CD/CD-R digital output terminal is interrupted
momentarily. The digital input of the connected external device is temporarily unlocked at this time.
NOTE:
• When relaying between a CD and CD-R, the digital data from the CD/CD-R digital output terminal is interrupted
momentarily. The digital input of the connected external device is temporarily unlocked at this time.