Filter
Top Products
System Operations System Operations
14
ENGLISH
ENGLISH
CD
1
/
3
MENU/SET
[
9
]
TAPE
2
[TIME/DISPLAY]
CD
2
<ON/STANDBY>
MENU/SET
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Receiver [DRA-F102/F102DAB]
<ON/STANDBY>
CD
1
/
3
CD
2
This unit [DCD-F102]
• All of the system operations are controlled from the receiver (DRA-
F102/F102DAB).
• It is also possible to connect devices other than F102 series
components. In this case, however, system operations cannot be
performed.
Auto power on function
Press [CD 1/3] when the power of the various
components is set to the standby mode.
• The power of the various components turns on and the receiver’s
function automatically switches to “CD”.
• When a disc is loaded in the DCD-F102, the disc starts playing.
The auto power on function does not work even when
<
CD
1/3
>
is pressed.
Auto function selection
Press CD 1/3 during playback on one of the other
components.
• Playback stops.
• The receiver’s function automatically switches to “CD” and
playback of the disc starts.
This function lets you easily record the tracks from a CD onto a
cassette tape.
For instructions, see the cassette deck’s operating instructions.
CD synchronized recording
The receiver’s timer function can be used to perform playback at
specific times.
For instructions, see the receiver’s operating instructions.
Timer function
System remote control unit
[RC-1034]
TAPE
2
Cassette deck [DRR-F102]
When the DCD-F102 and receiver (DRA-F102/F102DAB) are
connected using system connections, the DCD-F102 can be
operated using the system remote control (RC-1034) unit included
with the receiver.