Denon DCD-F102 CD Player User Manual


 
Operation
7
ENGLISH
ENGLISH
Turning the power on
[POWER OFF]
1
/
3
2
[TIME/DISPLAY]
<
5
>
2
1
/
3
<ON/STANDBY>
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Operation
Press
<
ON/STANDBY
>
.
When the power turns on, the power indicator lights green.
¢Turning the power off (to the standby mode):
Press
<
ON/STANDBY
>
again or [POWER OFF].
The power indicator turns off.
NOTE:
•To turn off the power while a disc is playing, be sure to press 2
to stop playback before turning off the power.
When in the standby mode, a very small amount of power is
consumed, even if all the indicators are turned off.
Loading discs
Press
<
5
>
to open the disc tray.
( page 2)
¢To close the disc tray:
Press
<
5
>
again.
NOTE:
Be sure to turn on the power when opening and closing the disc
tray.
Do not push the disc tray in by hand when the power is off. Doing
so could damage it.
Do not insert foreign objects into the disc tray. Doing so will
damage it.
Starting playback
Press 1/3.
The “1” indicator lights and playback starts.
Once all the tracks recorded on the disc have been played, the
stop mode is set automatically.
[TIME/DISPLAY] can be used to switch the information displayed.
To stop playback
Press 2 during playback.
To pause playback
Press 1/3 during playback.
The “3” indicator lights and the pause mode is set.
¢To resume playback:
Press 1/3.
When the DCD-F102 and receiver (DRA-F102/F102DAB) are
connected using system connections, the DCD-F102 can be
operated using the system remote control (RC-1034) unit included
with the receiver.
Elapsed time of
currently playing
track
Remaining time of
currently playing
track
Remaining time of all remaining tracks