Filter
Top Products
Getting Started Connections Setup Playback Remote Control Multi-zone Information Troubleshooting
ENGLISH
SpecificationsConnections
iPod
®
R
L
R
L
"4%/8
iPod
• With the default settings, the iPod can be used connected to
the VCR (iPod) connector.
• To assign the iPod to a connector other than VCR (iPod), make
the settings at menu “Input Setup” – “(input source to which
iPod dock assigned)” – “Assign” – “iPod Dock” (vpage 38).
Use a DENON control dock for iPod (ASD-1R, ASD-3N or ASD-
3W sold separately) to connect the iPod to the AVR-789. For
instructions on the control dock for iPod settings, refer to the
control dock for iPod’s operating instructions.
"6%*0 7*%&0
"6%*0
3-
065
015*$"-
065
$0.10/&/57*%&0
: 1# 13
065
47*%&0
065
7*%&0
065
R
L
R
L
TV/CABLE Tuner
Select the terminal to use and connect the device.
TV tuner
When using a coaxial cable for the digital audio connection,
make the settings at menu “Input Setup” – “Assign” – “Digital
In” (vpage 38).
Carefully check the left (L) and right (R) channels and the inputs and outputs, and
be sure to interconnect correctly.
Connecting the Recording
Components
R
L
R
L
R
L
R
L
015*$"-
47*%&0 47*%&0
*/
3-3-
*/*/ 065
7*%&0 "6%*07*%&0
065
"6%*0 015*$"-"6%*07*%&07*%&0
065
*/065
065
)%.*
Video Cassette Recorder
Select the terminal to use and connect the device.
Video cassette recorder
• When recording via the AVR-789, the playback device’s cable must be of the
same type as the cable used to connect the AVR-789’s VCR OUT connector.
Example: TV IN → S-Video cable : VCR OUT → S-Video cable
TV IN → Video cable : VCR OUT → Video cable
• When using a component video cable for the video connection, make the
settings at menu “Input Setup” – “Assign” – “Component In” (vpage 38).
NOTE
Do not connect the output of the component connected to the AVR-789’s
OPTICAL2 output connector to any input connector other than OPTICAL2.