Filter
Top Products
9
Press the ENTER button to finish
surround parameter mode.
(Remote control unit)
8
When the surround parameters are set using the buttons on
the main unit, stop operating buttons after completing the
settings. The settings are automatically finalized and the
normal display reappears after several seconds.
Select the various parameters.
SURROUND
PARAMETER
(Main unit) (Remote control unit)
6
7
Set the various surround parameters.
SELECT
(Main unit) (Remote control unit)
(Remote control unit)
NOTE:
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
or or
MODE musicMODE cinema
5
Select the optimum mode for the source.
SELECT
(Main unit) (Remote control unit)
Surround parameters q
Pro Logic IIx and Pro Logic II Mode:
• The Cinema mode is for use with stereo television shows and
all programs encoded in Dolby Surround.
• The Music mode is recommended as the standard mode for
auto sound music systems (no video), and is optional for A/V
systems.
• The Pro Logic mode offers the same robust surround
processing as original Pro Logic in case the source contents is
not of optimum quality.
• The Game mode for playing games.The game mode can only be
used with 2-channel audio sources.
Select one of the modes (“Cinema”, “Music”, “Pro Logic”or
“Game”).
Panorama Control:
This mode extends the front stereo image to include the
surround speakers for an exciting “wraparound” effect with side
wall imaging.
Select “OFF” or “ON”.
Dimension Control:
This control gradually adjust the soundfield either towards the
front or towards the rear.
The control can be set in 7 steps from 0 to 6.
Center Width Control:
This control adjust the center image so it may be heard only
from the center speaker; only from the left/right speakers as a
phantom image; or from all three front speakers to varying
degrees.
The control can be set in 8 steps from 0 to 7.
DTS NEO:6 Mode:
• Cinema
This mode is optimum for playing movies. Decoding is
performed with emphasis on separation performance to achieve
the same atmosphere with 2-channel sources as with 6.1-
channel sources.
This mode is effective for playing sources recorded in
conventional surround formats as well, because the in-phase
component is assigned mainly to the center channel (C) and the
reversed phase component to the surround (SL, SR and SB
channels).
• Music
This mode is suited mainly for playing music. The front channel
(FL and FR) signals bypass the decoder and are played directly
so there is no loss of sound quality, and the effect of the
surround signals output from the center (C) and surround (SL,
SR and SB) channels add a natural sense of expansion to the
sound field.
CENTER IMAGE (0.0 to 1.0: default 0.3):
The center image parameter for adjusting the expansion of the
center channel in the DTS NEO:6 MUSIC mode has been added.
50
ENGLISH