Dolby Pro Logic
II
x (Pro Logic
II
) mode
2
Select the Dolby Surround Pro Logic IIx mode.
LOGICII
Light
(Main unit) (Remote control unit)
3
Play a program source with the mark.
• For operating instructions, refer to the manuals of the respective components.
5, 74, 61 2
4
5, 7
1
9
5, 7
2
6
6
STANDARD
4
Select the surround parameter mode.
1
Select the function to which the component you want to play
is connected.
Example: DVD
FUNCTION
(Main unit) (Remote control unit)
Display
To perform this operation from the remote control unit, check that
the mode selector switch is set to “AUDIO”.
• The Dolby Pro Logic II indicator lights.
The Dolby Surround Pro Logic
IIx Cinema or Music mode can
be chosen directly by pressing
the CINEMA or MUSIC button
on the remote control unit
during playback in the Dolby
Surround Pro Logic IIx mode.
To play in the PL IIx mode, set “S. BackSp” at the Speaker Configuration setting to “1Sp” or “2Sp”.
To play in the PL IIx mode, set “Surround Back” at the Power Amp Assign setting.
SURROUND
PARAMETER
(Main unit)
(Remote control unit)
Display
47
ENGLISH