• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as (described)
below.
1
Select the speaker whose level you want
to adjust.
The channel switches as shown below each time the button
is pressed.
2
Adjust the level of the selected
speaker.
FL C FR SR SBR SBL
SLSW
2
1
2
NOTE: Please make sure the “AUDIO” position of the slide
switch on the remote control unit.
Default setting of channel level is 0 dB.
The level of the selected speaker can be adjusted within
the range of +12 to –12 dB using the cursor buttons.
SW channel level can be turned off by decreasing one step
from –12 dB.
OFF ´ –12 dB ´ +12 dB
When the surround back speaker setting is set to
“1sp” for “Speaker Configuration”, this is set to “SB”.
“SB” appears only when “POWER AMP ASSIGN” setting
is SURR. BACK mode.
46
ENGLISH