Filter
Top Products
Setting the delay time
• Input the distance between the listening position and the different speakers to set the delay time for the surround mode.
Preparations:
Measure the distances between the listening position and the speakers (L1 to L5) on the diagram at the
right).
L1: Distance between center speaker and listening position
L2: Distance between front speakers and listening position
L3: Distance between surround speakers and listening position
L4: Distance between surround back speaker and listening position
L5: Distance between subwoofer and listening position
CAUTION:
Please note that the difference for every speaker should be 20 ft or less.
NOTES:
• No setting when “None” has been selected for the Speaker Configuration setting.
• Surround back is not displayed when ZONE 2 is set with the POWER AMP ASSIGN setting.
L1
L2
L5
L3
L4
Center FRFL
Subwoofer
SL
Listening position
SR
SBR
1
Select the speaker to be set.
2
Set the distance between the speaker and listening position.
The distance changes in units of 1 foot (0.1 meters) each time the button is pressed. Select the value closest
to the measured distance.
3
Press the ENTER or (down) button to enter the setting and switch the SUBWOOFER MODE setting.
7 FRONT L 12ft
SBL
23
ENGLISH