Filter
Top Products
4 - The PatchMix DSP Mixer
Mixer Strip Creation
28 Creative Professional
Managing Your Inserts
To Delete Effects from an Insert:
f Tip: Select the Plug-in
and press the Delete key
to delete the plug-in from
the strip.
1.
Right-Click over the Insert Effect you wish to delete. A yellow line around the insert
location indicates that it is selected. A pop-up dialog box appears.
2. Select Delete Insert to remove the selected insert or select Delete All Inserts to
remove all inserts.
3. The insert(s) are deleted from the insert chain.
To Bypass an Insert:
Inserts can be bypassed if you want to temporarily hear the audio without the effect or
insert. Bypass can also be used to turn off a Send Insert.
Method #1
1. Click on the Effect (in the Insert section) and select FX in the TV display.
2. Click the Bypass button.
Method #2
1. Right-Click over the Effect you want to bypass (in the Insert section). A pop-up
dialog box appears.
2. Select Bypass Insert from the list of options.
To Bypass All Inserts:
All Inserts in a strip can be also be bypassed with a single command.
1. Right-Click over the Effect you want to bypass (in the Insert section). A pop-up
dialog box appears.
2. Select Bypass All Inserts from the list of options.
To Solo an Insert:
Inserts can also be soloed. Solo bypasses all the other inserts in the strip and allows you
to hear only the soloed effect. This feature is very useful when adjusting the effect
parameters.
Method #1
1. Click on the Effect (in the Insert section) and select FX in the TV display.
2. Click the Solo button.
Method #2
1. Right-Click over the Effect you want to Solo (in the Insert section). A pop-up dialog
box appears.
2. Select Solo Insert from the list of options.