2 - Installation
Software Installation
E-MU Digital Audio System 5
Software Installation
Installing the E-MU 0404 Drivers
The first time you restart your PC after installing the E-MU 0404 PCI card, you will need
to install the PatchMix DSP software and E-MU 0404 PCI card drivers.
Windows 2000 or Windows XP
The software is not compatible with other versions of Windows.
E
Serial Number -
During the registration
process, you will be asked
to enter your serial
number. The serial
number is located on the
back of the box and on
the 0404 PCI Card.
1.
After you have installed your audio card, turn on your computer. Windows
automatically detects your audio card and searches for device drivers.
2.
When prompted for the audio drivers, click the
Cancel
button.
3.
Insert the E-MU software Installation CD into your CD-ROM drive. If Windows
AutoPlay mode is enabled for your CD-ROM drive, the CD starts running automati-
cally. If not, from your Windows desktop, click
Start
->
Run
and type
d:\setup.exe
(replace
d:\
with the drive letter of your CD-ROM drive). You can also open the CD
and double-click
Setup.exe
.
4.
The installation splash screen appears. Follow the instructions on the screen to
complete the installation.
5.
Choose
“Continue Anyway”
when you encounter the “Windows Logo Testing”
warning screen. See note below for more information.
6.
When prompted, restart your computer.
Note About Windows Logo Testing
When you install the Digital Audio System drivers, you will see a dialog box that
informs you that the driver has not passed Windows Logo testing.
The Digital Audio System drivers are not signed because the driver does not support
some of the consumer audio features that the Microsoft driver signing program
requires, most notably Digital Rights Management.
However, the Digital Audio System drivers have been rigorously tested using the
same test procedures that a signed driver requires, and it passes in all important
categories, including those that measure the relative stability of the driver. So, it is
perfectly safe to install these drivers on your computer.
Uninstalling all Audio Drivers and Applications
At times you may need to uninstall or reinstall some or all of the audio card's applica-
tions and device drivers to correct problems, change configurations, or upgrade
outdated drivers or applications. Before you begin, close all audio card applications.
Applications still running during the uninstallation will not be removed.
1.
Click
Start
->
Settings
->
Control Panel
.
2.
Double-click the
Add/Remove Programs
icon.
3.
Click the
Install/Uninstall
tab (or
Change or Remove Programs
button).
4.
Select the E-MU 0404 PCI card entry, or the application entry and then click the
Add/Remove
(or
Change/Remove
) button.
5.
In the
InstallShield Wizard
dialog box, select the
Remove
option.
6.
Click the
Yes
button. Restart your computer when prompted.
7.
You may now re-install existing or updated E-MU 0404 PCI card device drivers or
applications.