Filter
Top Products
AUD1 (-AUD4) These four keys each directly access one of the
Audio Sources consisting of a hard-wired Analog Audio input plus
any associated Digital Audio input selected during setup. (These keys
cannot be used to select Zone Sources. The > and < Scroll keys
must be used.)
EX 7.1 Press this key to listen to the Special 7.1 Analog inputs. (The
7.1 inputs cannot be accessed in the remote Zone.)
TAPE Press this key to Listen to tape through the Main output. This is
also a useful key to use to Monitor the quality of a tape you are
making. The Main Source continues to be the Source selected, so
you can continue to Tape. Toggle this Key to switch between Tape
and main Source. See Note in Setup regarding the Tape Loop.
ZONE Press this key to access the Zone Access Mode. Immediately
press either the \/ or /\ keys to decrease or increase the volume or
the < or > key to Scroll back and forth through the Ten Sources.
MUTE THIS KEY HAS TWO FUNCTIONS: Press this key to Mute the
Main outputs. ALSO: After pressing the ZONE key use this key to
Mute the Zone outputs.
\/ VOLUME Press this key to decrease the volume of the Main
outputs. The Main volume keys affect only the Main outputs.
VOLUME /\ Press this key to increase the volume of the Main
outputs. The Main volume keys affect only the Main outputs.
.
16