Filter
Top Products
SUB \/ Press this key to Decrease the SUBwoofer(s) output. This is a
temporary correction of the Subwoofer output. Low frequency output
resets to levels set in Setup when the SSP-30 MKII is put into Standby.
SUB /\ Press this key to Increase the SUBwoofer(s) output. This is a
temporary correction of the Subwoofer output.
CANCEL Press this key to leave the Setup Menus without saving any
of the changes you might have made.
/\ THIS KEY HAS TWO FUNCTIONS: Press this key to navigate
through the different selections available in the Setup Menus, while in
a menu select or change a value. ALSO: After pressing the ZONE
key this key and the \/ key increase or decrease the volume at the
Zone outputs.
MENU Pressing the MENU key brings up the page of the Setup
Menu you were last using. This makes it easy to return to a setup
parameter you were trying to get just right. No matter where you start
in the Setup Menu though, you can quickly and easily navigate to
any other section.
< THIS KEY HAS TWO FUNCTIONS: Press this key to navigate
through the different selections available in the Setup Menus, while in
a menu select or change a value. ALSO: After pressing the ZONE
key this key and the > key scroll through the Audio and Audio/Video
Sources to play at the Zone outputs
ENTER The ENTER key is used in the Setup Mode to memorize a
change, or to access a sub menu or to search for an input.
> THIS KEY HAS TWO FUNCTIONS: Press this key to navigate
through the different selections available in the Setup Menus, while in
a menu select or change a value. ALSO: After pressing the ZONE
key this key and the < key scroll through the Audio and Audio/Video
Sources to play at the Zone outputs
\/ THIS KEY HAS TWO FUNCTIONS: Press this key to navigate
through the different selections available in the Setup Menus, and
while in a menu to select or change a value. ALSO: After pressing
the ZONE key this key and the /\ key decrease or increase the
volume at the Zone outputs.
AV1 (-AV6) These six keys each directly access one of the AV
Sources consisting of a Video Input and a hard-wired Analog Audio
input plus any associated Digital Audio input selected during setup.
(These keys cannot be used to select Zone Sources. The > and <
Scroll keys must be used.)
15