Filter
Top Products
OWNER’S MANUAL/INSTALLATION GUIDE
19
Symptom Cause Solution
Unit does not No power. Verify power wiring
work. to unit (see page 18).
Check the Remote
for a good battery.
Videocassette Another tape Eject first video cas-
does not insert is already in unit. sette and insert a
into unit. second tape.
Dew/Heat Sensor Leave power on to
is on. unit. (see page 4).
Pressing POWER Unit is in Auto Go to Auto Repeat
will not turn unit Play and buttons in the On-Screen
off. are inoperable function and turn that
(see page 11). function off.
Tape will not Tape is fully Eject videocassette
rewind or rewound or at and check tape
fast forward. beginning. position.
Symptom Cause Solution
Picture is noisy Videocassette Eject videocassette
is worn. and play another.
Tracking is not Adjust tracking
set optimally. (see page 10).
Video heads Clean unit – see
are dirty. your Clarion dealer.
Videocassette Another tape Eject first video cas-
does not insert is already in unit. sette and insert a
into unit. second tape.
Dew/Heat Sensor Leave power on to
is activated. unit. (see page 4).
Hi-Fi indicated Videocassette Play a videocassette
but sound is recorded by stereo that has a Hi-Fi
mono. recorder in mono. stereo soundtrack.
Videocassette Unit is set to mono Use Remote buttons
sounds mono. in Audio Output to change audio
mode. modes (see page 11).
TROUBLESHOOTING