Clarion VDH910 Cassette Player User Manual


 
OWNER’S MANUAL/INSTALLATION GUIDE
7
1
POWER Button
Press to power the unit ON or OFF.
2
EJECT Button
Press to eject a videocassette from the compartment.
3
CASSETTE Compartment
Insert a videocassette which automatically loads the tape.
4
STOP Button
Press to stop any play, fast forward, or rewind mode.
5
RECORD Button
Engages the RECORD mode.
6
POWER Indicator
Illuminates when the player is powered up.
7
RECORD Indicator
Illuminates when RECORD mode is ON.
8
SLP Indicator
Illuminates when playback is in Standard Long Play.
9
DEW/HEAT Indicator
When illuminated and flashing the PLAY mode is dis-
abled. Press the EJECT function to remove the internal
cassette to prevent damage (see page 4).
0
Remote IR Sensor opening
Allows the IR to function through the front of the player.
q
REW Button
Press REW to rewind the tape. If PLAY is engaged, press
REW to reverse search for a desired video segment.
w
PLAY Button
Press button to play the videocassette.
e
FF Button
Press FF to fast forward the tape. If PLAY is engaged,
press FF to forward search for a desired video segment.
r
Front A/V (LINE2) Video Input
Use an RCA video cable to connect video signal from an
alternate A/V source. You can choose either video source
LINE 2 or LINE 1 (Rear A/V Inputs) using the Remote
control.
t
STEREO IN L/R LINE-2 (Front RCA Jacks)
Use a stereo RCA audio cable to connect stereo audio from an
alternate A/V source. You can choose either audio source
LINE 2 or LINE 1 (Rear A/V Inputs) using the Remote
control.