Filter
Top Products
OWNER’S MANUAL/INSTALLATION GUIDE
11
Figure 7. Record Speed, Auto Replay, and Audio Output
screens for On-Screen Programming.
** MAIN MENU **
RECORD SPEED ............. (SP)
AUTO REPEAT............... (OFF)
AUDIO OUTPUT..... (STEREO)
CHANNEL SETUP
VCR OUTPUT CH
.......... (3CH)
[SHIFT/ENTER] [MENU]
RECORD SPEED........... (SLP)
** MAIN MENU **
RECORD SPEED ............. (SP)
AUTO REPEAT............... (OFF)
AUDIO OUTPUT..... (STEREO)
CHANNEL SETUP
VCR OUTPUT CH.......... (3CH)
[SHIFT/ENTER] [MENU]
AUTO REPEAT................. (ON)
** MAIN MENU **
RECORD SPEED ............. (SP)
AUTO REPEAT............... (OFF)
AUDIO OUTPUT..... (STEREO)
CHANNEL SETUP
VCR OUTPUT CH.......... (3CH)
[SHIFT/ENTER] [MENU]
AUDIO OUTPUT........... (LEFT)
AUDIO OUTPUT......... (RIGHT)
AUDIO OUTPUT......... (MONO)
To Store
and EXIT
Record Speed (SP or SLP)
The VDH910 can record at standard speed (SP) or a slower
tape speed (SLP). Tapes recorded at standard speed provide a
clearer picture, while the slower speed (SLP) allows more
material on the tape (up to 6 hours).
Auto Repeat Play (ON)
At the end of tape playback, the unit will rewind the tape to
beginning and restart. This sequence will occur indefinitely
until cancelled.
To temporarily cancel Auto Repeat Play, press any of tape
function buttons while in this mode. The function will turn off
for that cassette only.
Use the Remote Control to change the Auto Repeat Play in the
On-Screen menu to turn this function OFF.
Audio Output Modes
Using the Remote Control, select different audio modes when
playing a Hi-Fi stereo videocassette.
Press ENTER one or more times to toggle to the appropriate
audio playback and record choice.