RMX465D 11
Adjusting the bass
1. Press A-M button 2 and select “BASS”.
2. Turning the Rotary knob $ clockwise empha-
sizes the bass; turning it counterclockwise
attenuates the bass.
∗ The factory default setting is “0”. (Adjustment
range: −6 to +6)
3. When the adjustment is complete, press A-M
button 2 several times until the function mode
is reached.
Adjusting the treble
1. Press A-M button 2 and select “TREB”.
2. Turning the Rotary knob $ clockwise empha-
sizes the treble; turning it counterclockwise
attenuates the treble.
∗ The factory default setting is “0”. (Adjustment
range: −6 to +6)
3. When the adjustment is complete, press A-M
button 2 several times until the function mode
is reached.
Adjusting the balance
1. Press A-M button 2 and select “BAL”.
2. Turning the Rotary knob $ clockwise empha-
sizes the sound from the right speaker; turn-
ing it counterclockwise emphasizes the sound
from the left speaker.
∗ The factory default setting is “0”. (Adjustment
range: L9 to R9)
3. When the adjustment is complete, press A-M
button 2 several times until the function mode
is reached.
Adjusting the fader
1. Press A-M button 2 and select “FAD”.
2. Turning the Rotary knob $ clockwise empha-
sizes the sound from the front speakers; turn-
ing it counterclockwise emphasizes the sound
from the rear speakers.
∗ The factory default setting is “0”. (Adjustment
range: F9 to R9)
3. When the adjustment is complete, press A-M
button 2 several times until the function mode
is reached.
Turning on/off the loudness
The loudness effect emphasizes the bass and
treble to create a natural sound tone. When you
are listening to music at a low volume, it is rec-
Basic Operations
ommended to use the loudness effect.
1. Press and hold LD button 2 for 1 second or
longer to turn on the loudness effect. When
the loudness effect is turned on, the display
will show “LOUD ON”.
2. Press and hold LD button 2 for 1 second or
longer to turn off the loudness effect. The
display will show “LOUD OFF”.