Clarion RMX465D CD Player User Manual


 
RMX465D 15
CD Changer Operations
8. OPERATIONS OF ACCESSORIES
CD changer functions
When an optional CD changer is connected
through the C-BUS cable, this unit controls all
the CD changer functions. This unit can control
a total of 2 changers.
Press FNC button 3 and select the CD changer
mode to start play. If 2 CD changers are
connected, press FNC button 3 to select the
CD changer for play.
If NO MAGA appears in the display, insert the
magazine into the CD changer. LOADING
appears in the display while the player loads
(checks) the magazine.
If NO DISC appears in the display, eject the
magazine and insert discs into each slot. Then,
reinsert the magazine back into the CD changer.
CAUTION
CD-ROM discs cannot be played in the CD
changer.
Pausing play
1. Press Play/pause button % to pause play.
PAUSE appears in the display.
2. To resume play, press Play/pause button %
again.
Selecting a CD
Each of the Direct button 0 corresponds to a
disc loaded into the magazine.
Selecting a disc from 1 to 6
Press the corresponding Direct button 0 to select
the desired disc.
Switching Magazine
This function can be used only when the connected
CD changer can store a multiple number of maga-
zines.
Every time the MAG button @ is pressed, the next
magazine will be selected.
If a CD is not loaded in a slot of the magazine,
pressing the Direct button 0 corresponding to its
disc number is invalid.
Selecting a track
Track-up
1. Press the right side of SRCH button # to
move ahead to the beginning of the next track.
2. Each time you press the right side of SRCH
button #, the track advances ahead to the
beginning of the next track.
Track-down
1. Press the left side of SRCH button # to move
back to the beginning of the current track.
2. Press the left side of SRCH button # twice
to move to the beginning of the previous track.
Fast-forward/fast-backward
Fast-forward
Press and hold the right side of SRCH button #
for 1 second or longer.
Fast-backward
Press and hold the left side of SRCH button #
for 1 second or longer.
Top function
The top function plays from the first track (track
No. 1) of the disc.
Press the Direct button 0 with the same number
as the CD playing.
If a CD is not loaded in a slot of the magazine,
pressing the Direct button 0 corresponding to its
disc number is invalid.
Scan play
The scan play locates and plays the first 10
seconds of each track on a disc automatically.
This function continues on the disc until it is
canceled.
The scan play is useful when you want to select a
desired track.
1. Press SCN button 9 to start track scanning.
SCN lights in the display.
2. To cancel the scan play, press SCN button 9
again. SCN goes off from the display and
the current track continues to play.
Disc scan play
The disc scan play locates and plays the first 10
seconds of the first track on each disc in the
currently selected CD changer. This function
continues automatically until it is canceled.
The disc scan play is useful when you want to
select a desired CD.